VESC-100-250-PRODUCT-SHOT
VESC-100-250-CLOSEUP
VESC-100-250-PRODUCT-SHOT
VESC-100-250-CLOSEUP

VESC 100/250 MkII

For bulk enquiries, please Contact Us

 

From: £300.00 +VAT

Description

The Trampa VESC is a powerful, open source electronic speed controller designed to deliver smooth, precise and customisable performance for electronics projects. Our best-in-class design has been time-tested and proven globally.

The VESC 100/250 measures 141 x 82 x 14mm

The 100/250 VESC features the following ports and outputs:

– Sensor port for motor sensors (ABI, HALL, AS5047p magnetic precision encoders)
– CAN Port for CAN communication with other devices & VESC arrays, CAN & UAV CAN
– PPM port to connect PPM transceivers
– COMM port for various kinds of other communication methods like I2C,
ADC, Uart, SPI. You can use your Arduino or RaspberryPi to control the VESC!
– SWD port to get direct access to the chipset. diagnostics, debugging, & real time data.
– AUX port to supply 12V and 5V to external devices.
– Micro USB connection

Rating

·    Voltage: 14V – 100V (Safe for 4S to 22S LiIon).
·    Voltage spikes may not exceed 100V!
·    Current: Continuous 200-250A, Burst 400A.  Values depend on the mounting, ambient temperature & air/water circulation around the device!
·    5V & 12V 1A output for external electronics
·    3.3V 0,5A output for external electronics
·    Modes: DC, BLDC, FOC (sinusoidal)
·    Supported sensors: ABI, HALL, AS5047
·    up to 150K ERPM drivable

Features

·    Accurate current and voltage measurement on all motor phases (3x shunts)
·    Regenerative braking
·    Sensored or sensorless operation + hybrid mode
·    Configurable RPM-, current-, voltage- and power limits
·    Input source: PPM, Analog, NRF Nyko Kama Nunchuck
·    Communication ports: USB, CAN, UART
·    Throttle curve & ramping for all input sources
·    Seamless 4-quadrant operation
·    Motor revolution, amp hour, watt hour counting
·    Real time data analysis and read out via communication ports
·    Adjustable protection against:
–    Low input voltage
–    High input voltage
–    High motor current
–    High input current
–    High regenerative braking current – separate limits for the motor and the input
–    High RPM – Separate limits for each direction
–    Over tempertaure – MOSFET & motor

Additional information

Weight 500 g
HS Code

8504404000
origin_country

Taiwan, Provenience of China

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

VESC Electronic Speed controller with cables

The VESC Electronic Speed Controller.

Globally renowned high quality motor controller

You will likely have come across VESC™ by now, it is very special in the field of Electronic Speed Controllers so we are very proud that our boards all come as standard with a VESC™ and VESC™ BMS.

VESC6 Mk6 HP – Quite simply a higher powered version of the VESC6 Mk6, with the same trusted reliability and ease of control. Why High Power? Because the mosfets in the HP allow more amps to run through.

VESC6 Mk6 – An incredibly reliable and high performing compact speed controller, used by over 2000 companies in many other applications across the world

VESC 6/75 – If you are using a 16s Battery Pack to power your mountainboard this controller will automatically be selected to handle the higher voltage.

Which Battery Pack?

We make battery packs for both Li-Po & Li-Ion cells.  The (S) stands for Series - adding cells in series increases voltage, The (P) stands for Parallel - adding cells in parallel increases capacity.
A higher voltage will take you faster and higher capacity will take you further. See the table below for further comparison:.

Battery Power

Battery PackCellsCapacityVoltage at peak
12S Li-Po12S 1P20Ah50.4V
16S Li-Po16S 1P20Ah67.2V
12S 21700 Li-Ion12S 7PMolicell P42A – 29.4Ah
Samsung 40T- 28Ah		Molicell P42A – 50.4V
Samsung 40T – 50.4V

Battery BMS, Enclosure & Charger

Battery PackBMSEnclosureChargerBattery (+charger)
12S Li-PoIn chargerClassic or MassiveUltramat 18
UltraPower
£840 +VAT
16S Li-PoVESC BMS16S Massive16S 8A Li-ion £675 +VAT
12S 21700 Li-IonVESC BMSMassive or Double Massive12S 6A Li-ion
12S 12A Li-ion		£574 + VAT
£609 +VAT

Li-Po: These cells are more expensive, however you may consider them worth it because they have less components and therefore provide easy plug and play capability as well as making it possible to do a quick battery swap. Li-Po cells also have a higher discharge performance than the Li-ion packs. 

Li-ion:  Individual cells means that you have a serviceable battery pack, swapping out only the individual cells should they be damaged. These cell packs require some electrical knowledge.  

We suggest that if you have limited electrical knowledge that you choose Li-Po batteries for their ease.