This spacer sits between the truck and the wheels. It is used to perfectly position Trampa wheels on to the truck.
The size of the spacer will depend on the type of truck and the type of wheel you are fitting it to. See Description tab for further size information.
Wheel Support Spacers are included with all relevant* Truck purchases. *not all truck/wheel combinations require spacers.
CNC’d from heat treated aluminium and then bead polished to give the metal extra surface protection and shiny appearance.
£1.00 +VAT
Axle size = 9.525mm
6mm is a spacer used with the offset Megastar 8″ hubs and offset Megastar 9″ hubs only
18.2mm is the standard mountain board wheel support spacer, it connects the wheels with the hanger – we fit these to the front trucks of an electric board and to both front and rear trucks for non electric boards
44mm – specifically for our skate trucks, it connects the wheels with the hanger, on both the front and the back.
Axle size = 12mm
18.2mm – is the standard mountain board wheel support spacer, it connects the wheels with the hanger – we fit these to the front trucks of an electric board and to both front and rear trucks for non electric boards. These come in the 10 Trampa Colours Range.
22mm – is a spacer used with Primo hubs only
| Weight | 5 g |
|---|---|
| Dimensions | 18.2 × 16 × 16 mm |
| HS Code | 7616100099 |
| origin_country | China |
Globally renowned high quality motor controller
You will likely have come across VESC™ by now, it is very special in the field of Electronic Speed Controllers so we are very proud that our boards all come as standard with a VESC™ and VESC™ BMS.
VESC6 Mk6 HP – Quite simply a higher powered version of the VESC6 Mk6, with the same trusted reliability and ease of control. Why High Power? Because the mosfets in the HP allow more amps to run through.
VESC6 Mk6 – An incredibly reliable and high performing compact speed controller, used by over 2000 companies in many other applications across the world
VESC 6/75 – If you are using a 16s Battery Pack to power your mountainboard this controller will automatically be selected to handle the higher voltage.
We make battery packs for both Li-Po & Li-Ion cells.
The (S) stands for Series - adding cells in series increases voltage, The (P) stands for Parallel - adding cells in parallel increases capacity.
A higher voltage will take you faster and higher capacity will take you further. See the table below for further comparison:.
Battery Power
Battery Pack Cells Capacity Voltage at peak
12S Li-Po 12S 1P 20Ah 50.4V
16S Li-Po 16S 1P 20Ah 67.2V
12S 21700 Li-Ion 12S 7P Molicell P42A – 29.4Ah
Samsung 40T- 28AhMolicell P42A – 50.4V
Samsung 40T – 50.4V
Battery BMS, Enclosure & Charger
Battery Pack BMS Enclosure Charger Battery (+charger)
12S Li-Po In charger Classic or Massive Ultramat 18
UltraPower
£840 +VAT
16S Li-Po VESC BMS 16S Massive 16S 8A Li-ion £675 +VAT
12S 21700 Li-Ion VESC BMS Massive or Double Massive 12S 6A Li-ion
12S 12A Li-ion£574 + VAT
£609 +VAT
Li-Po: These cells are more expensive, however you may consider them worth it because they have less components and therefore provide easy plug and play capability as well as making it possible to do a quick battery swap. Li-Po cells also have a higher discharge performance than the Li-ion packs.
Li-ion: Individual cells means that you have a serviceable battery pack, swapping out only the individual cells should they be damaged. These cell packs require some electrical knowledge.
We suggest that if you have limited electrical knowledge that you choose Li-Po batteries for their ease.
